Request a Quote

Please, provide us with some details about you or your company. We will just send you the quote, no spam or ad emails.

Primary unit you are interested in *

How many

1

50

Other unit you are interested in (optional)

How many

1

50

Your message

We will send you the quote or contact you in less than 48 hours.

Inertial module

PI-48M

PI-48M

PI-48M is an inertial module for integration to your systems and designs. It is smaller and cheaper than the IMU PI-48, not environmentally protected and has different interfaces and power consumption. It provides the same level of accuracy as the IMU if it is correctly mounted, is not subjected to severe temperature gradients or exposed to powerful electro-magnetic interference. We have recommendations in the manual on how to integrate and use our modules in your systems so the best performance is achieved.

Full-scale range

Bias (In-Run Stability), (1σ)

Bias (Over Temperature), (1σ)

Angle Random Walk, (1σ)

Rate Noise Density

Scale Factor

Error over temp., (1σ)

Non-Linearity , (1σ)

Bandwidth (-3dB)

Misalignment, (1σ)

g-Sensetivity

Bias (In-Run Stability), (1σ)

Bias (Over Temperature), (1σ)

Angle Random Walk, (1σ)

Rate Noise Density

Scale Factor

Error over temp., (1σ)

Non-Linearity , (1σ)

Bandwidth (-3dB)

Misalignment, (1σ)

g-Sensetivity

Measurement Range

Bias (In Run Stability)(1σ)

Bias (Over Temperature) (1σ)

Noise Density

Scale Factor

Error over temp., (1σ)

Non-linearity

Bandwidth (-3dB)

Bias (In Run Stability)(1σ)

Bias (Over Temperature) (1σ)

Noise Density

Scale Factor

Error over temp., (1σ)

Non-linearity

Bandwidth (-3dB)

Temperature range (operating)

Input Power

Power Consumption (12V input)

Interfaces

Size

Weight

Vibration (20Hz - 2000Hz)

Out Data Rate

Input Power

Power Consumption (12V input)

Interfaces

Size

Weight

Vibration (20Hz - 2000Hz)

Out Data Rate

±490 deg/sec

0.9 deg/hr

< 20 deg/hr

0.06 deg/sqrt(hr)

0.0009 deg/sec/sqrt(Hz)

0.015%

< 0.01% of FS

100-250 Hz

< 2 arc min

TBD

0.9 deg/hr

< 20 deg/hr

0.06 deg/sqrt(hr)

0.0009 deg/sec/sqrt(Hz)

0.015%

< 0.01% of FS

100-250 Hz

< 2 arc min

TBD

±15 g

4 ug

0.5 mg

15 ug/sqrt(Hz)

0.03%

< 0.01% of FS

100 - 250 Hz

4 ug

0.5 mg

15 ug/sqrt(Hz)

0.03%

< 0.01% of FS

100 - 250 Hz

-40C - +85C

4.5 V to 3.6 V

450 mW

UART, SPI

47.25 x 33.6 x 33,8 mm

< 85 gram

6 g RMS

250 - 5000 Hz

4.5 V to 3.6 V

450 mW

UART, SPI

47.25 x 33.6 x 33,8 mm

< 85 gram

6 g RMS

250 - 5000 Hz

For all IMUs and inertial modules, we offer special boards that allow you to conveniently and correctly mount and connect our units for evaluation purposes. The boards have more common connectors and they are a very simple solution when you need a quick start or your application allows a bit extra volume for the purpose. Please, refer to our Accessories section for more details.

MANUAL

SAMPLE DATA

downloads

* - best achievable specs, provided correct mounting, no significant temperature gradients or electro-magnetic interference